A fiber optic factory, not a trading office
Shenzhen MingFiber Technology Co., Ltd. has been building optical assemblies since 2012. Nine lines, 68 people, one plant in Bao'an — and a testing bench that every cable passes over before it is packed.
We started on the polishing bench
MingFiber began in 2012 as a twelve-person workshop grinding and polishing patch cords for system integrators in Shenzhen. The equipment has changed — two interferometers, four automatic polishing machines, a climate chamber — but the working principle has not: an assembly is either measured or it is not finished.
Today we manufacture patch cords, pigtails, MPO trunks, FTTH drop cable and the accessories around them, and export to distributors, contractors and operators in more than sixty countries. Roughly 70% of production carries a customer’s brand rather than ours.
We are not the largest factory in Shenzhen, and we do not try to be the cheapest. We are set up for buyers who need a consistent batch, a drawing that is followed and a test report that matches the cable in the box.
Fourteen years from the polishing bench out
- 2012Founded in Bao’an
Started as a 12-person patch cord workshop supplying Shenzhen system integrators.
- 2015First export order
ISO 9001 certified; first container of SC/APC drop assemblies shipped to Southeast Asia.
- 2018MPO line added
MPO-12 and MPO-24 polishing and testing capability installed for data center customers.
- 2021New plant
Moved into a 3,200 m² facility with separate assembly, polishing, testing and packing areas.
- 2023FTTH portfolio
Added GJXFH drop cable, PLC splitters and distribution boxes to serve access network contractors.
- 202660+ export markets
Nine assembly lines, 68 staff, 120,000 assemblies per month.
Where the work happens
Our plant
Assembly
Testing
Splicing
Warehouse
PackingSix commitments we can be held to
Insertion loss and return loss are recorded for every assembly, with the serial number on the label.
If the drawing says ±20 mm, the cable is ±20 mm. Deviations are raised before production, not after.
You get a named contact who knows your part numbers, not a shared inbox.
Your label goes on the product; ours stays off it unless you ask.
7–12 working days for standard assemblies, confirmed in writing on the proforma.
Any failure is traced to the serial number and the fiber lot within one working day.
Want to see the line before you order?
Video call from the factory floor, or visit the plant in Bao’an District — 40 minutes from Shenzhen airport.