LC–LC Duplex OS2 Patch Cord
Duplex LC–LC patch cord in G.657A2 single-mode with 2.0 mm LSZH jacket, IL ≤ 0.15 dB and a serial-numbered test report per…
Angled-polish patch cords, splitters and nodes for analog 1550 nm transport, where return loss matters more than insertion loss.
Analog CATV punishes reflections. A 45 dB return loss at a headend patch panel shows up as carrier-to-noise degradation three amplifiers downstream, which is why every APC assembly we make is angle-inspected and measured for RL, not just IL. FC/APC and SC/APC assemblies, splitters with low polarization-dependent loss and flat drop leads sized for the clamps of the coax they replace are all produced in the same plant.
Duplex LC–LC patch cord in G.657A2 single-mode with 2.0 mm LSZH jacket, IL ≤ 0.15 dB and a serial-numbered test report per…
SC–SC duplex single-mode patch cord with push-pull latched connectors, 2.0 mm LSZH cable and low-loss UPC polish.
Laser-optimized OM4 LC–LC duplex patch cord in aqua LSZH, IL ≤ 0.15 dB at 850 nm for 10G/40G/100G trunks.
Simplex LC/APC patch cord with 8° angled polish and ≥ 60 dB return loss, the standard drop lead for GPON and XGS-PON…
Threaded FC/APC duplex patch cord for CATV headends and test racks, with a metal housing and ≥ 60 dB return loss.
FC/UPC duplex single-mode patch cord for telecom ODFs and legacy transmission equipment, flat PC polish at 50 dB return loss.
We will reply with a proposed bill of materials, the calculated loss per link and a price for the complete set.