Indoor Distribution Cable
12-fiber indoor distribution cable with 900 µm tight-buffered fibers and aramid yarn, for riser and equipment-room runs.
Factory-terminated flat drop cable with SC/APC connectors and test data, ready to plug into the ONT and splitter port.
Send quantity, length and destination. An engineer answers within one working day, with a drawing if you need one.
Get a quote Request a sampleNo minimum on samples · NDA on request
| Optical performance | |
|---|---|
| Fiber type | G.657A2 1 or 2-core |
| Connectors | SC/APC both ends (or SC/APC to bare) |
| Insertion loss | ≤ 0.30 dB per connector |
| Return loss | ≥ 60 dB |
| Cable and mechanical | |
| Jacket / construction | LSZH flat drop, 2.0 × 5.2 mm, black |
| Tensile strength | Short term 400 N |
| Bending radius | 15 mm (loaded) / 30 mm (installed) |
| Ordering and logistics | |
| Minimum order quantity | 200 pcs |
| Sample lead time | 3–5 working days (stock configuration) |
| Production lead time | 12–18 working days after drawing approval |
| Packaging | 1 pc / coil + PE bag, 50 pcs / carton |
| Certification | CE, RoHS 2.0, ISO 9001:2015; CPR Cca on LSZH cable |
| Customization | Length 10–300 m, one-end or both-end termination, pulling sock, wall box kit |
| Part number | MF-DC-PRE-SCA |
Values are typical for the standard build and are re-measured on every unit. Tighter grades are available on request — state the limit in your drawing and we quote to it.
1 pc / coil + PE bag, 50 pcs / carton
Attach a drawing if you have one — PDF, DWG, DXF, STEP or a photo of the sample.