Frequently asked questions
Specifications, minimum order quantities, samples, lead times, customization and shipping — the questions we answer most often, with the numbers.
Products and specifications
What is the difference between a patch cord and a pigtail?
A patch cord has a connector at both ends and is used to patch between equipment ports. A pigtail has one connector and one bare fiber end; the bare end is fusion spliced onto a cable in an ODF or splice closure. We manufacture both, and pigtails can be cut to the exact tray length you specify.
Which fiber grade should I order — G.652D or G.657A2?
G.652D is the standard single-mode fiber for outside plant and long spans. G.657A2 is bend-insensitive and is the right choice for drop cable, patch cords and any indoor route with tight bends; it remains fully compatible with G.652D equipment. If your link budget is tight or the cable will be coiled inside a wall box, specify G.657A2.
What insertion loss and return loss can you guarantee?
Standard single-mode patch cords are measured at IL ≤ 0.20 dB and RL ≥ 50 dB (UPC) or ≥ 60 dB (APC). Our premium grade is IL ≤ 0.15 dB and RL ≥ 55 dB. Low-loss MPO trunks are IL ≤ 0.25 dB. Every assembly is measured, not sampled, and the value is recorded against the serial number on the label.
Can you supply OM5 or 62.5/125 µm multimode?
Yes. OM1, OM2, OM3, OM4 and OM5 are all available, in aqua, violet, orange or gray jacket. OM5 is normally specified for SWDM4 applications above 100G.
Do you provide test reports?
Yes — a per-batch IL/RL report is included free of charge. Per-cable serial numbers are printed on the label so the report can be matched to the assembly on site. Interferometric end-face reports and CSV exports are available on request.
Samples and orders
What is your minimum order quantity?
Patch cords start at 100 pcs per length, pigtails at 50 sets of twelve, adapters at 500 pcs, MPO trunks at 20 pcs, pre-terminated drop cable at 200 pcs and bulk cable at 2,000 m. Mixed lengths can be combined to reach the MOQ.
How do samples work?
Stock configurations are sent within 3–5 working days, free of charge; you cover the freight. Custom lengths, printed labels or non-standard connectors need 5–7 working days and a small tooling charge, which is credited against the first bulk order.
What is the production lead time?
7–12 working days for standard patch cords and pigtails after drawing approval, 12–18 working days for MPO harnesses and pre-terminated drop cable, and 15–20 working days for bulk cable. Repeat orders with unchanged drawings usually ship in 7 days.
Do you support OEM branding?
Yes. We print your logo and part number on the label, the boot and the inner box, and we can pack to your artwork. We do not print our own brand on OEM shipments unless you ask us to.
Customization
Can you build to our drawing?
Yes — that is most of what we do. Send a PDF, DWG or STEP drawing through the inquiry form or by email and we will confirm feasibility, tooling cost and lead time within one working day. Custom ferrules, mixed connector types, breakouts with different leg lengths and non-standard label schemes are all routine.
What lengths can you make?
Patch cords from 0.3 m to 300 m, drop cable from 10 m to 300 m, MPO trunks from 1 m to 100 m. Tolerances are ±20 mm below 2 m and ±1% above.
Can you match a competitor’s part number?
Yes. Send the datasheet or the competitor part number and we will map it to our equivalent and quote a cross-reference.
Shipping and compliance
Which certifications do you hold?
ISO 9001:2015 and ISO 14001:2015 for the quality and environmental system, CE and RoHS 2.0 (EU 2015/863) for the product range, and CPR EN 50575 Cca for LSZH cable. Assembly is tested to IEC 61753-1 and end faces are inspected to IEC 61300-3-35. Certificate copies are sent on request — the scan shows the issuing body, the certificate number and the expiry date.
Do you ship to the EU and the US?
Yes. We ship DDP or DAP to the EU, UK, US, Canada, Australia, the Middle East and Southeast Asia. Express samples go by DHL or FedEx, bulk orders by air or sea freight with the forwarder of your choice. We handle the export declaration and provide the HS code on the invoice.
How are the goods packed?
Each assembly is individually bagged and labeled, then packed in a double-wall export carton with a packing list inside. Reels are crated or drummed. Carton dimensions and gross weight are confirmed on the proforma invoice before shipment.
Have a question about a specific part?
Send the part number and we will reply with the datasheet, current lead time and price for your quantity.