Optical assemblies for CATV and RFoG

Angled-polish patch cords, splitters and nodes for analog 1550 nm transport, where return loss matters more than insertion loss.

CATVLink-budget driven
Application 03

Analog CATV punishes reflections. A 45 dB return loss at a headend patch panel shows up as carrier-to-noise degradation three amplifiers downstream, which is why every APC assembly we make is angle-inspected and measured for RL, not just IL. FC/APC and SC/APC assemblies, splitters with low polarization-dependent loss and flat drop leads sized for the clamps of the coax they replace are all produced in the same plant.

≥ 60 dBreturn loss, APC
≤ 0.3 dBsplitter PDL
-40…+85 °Csplitter operating range
8°ferrule angle, inspected
CATV & RFoG Networks fiber optic assemblies
What we supply

The bill of materials

  • FC/APC patch cords — headend and transmitter racks
  • SC/APC patch cords — node and amplifier ports
  • PLC splitters — 1 × 2 to 1 × 16, low PDL
  • Fiber deep nodes — co-located assemblies on request
  • Drop leads — SC/APC to subscriber, pre-terminated
Why it matters

Where the decibels go

  • Return loss verified at 1550 nm, the wavelength that actually carries the analog signal.
  • Low-PDL splitters keep CSO and CTB inside specification.
  • FC threaded couplings stay mated on vibrating outdoor cabinets.

Other applications

Recommended products

Frequently specified here

Full catalog
Best seller LC–LC Duplex OS2 Patch Cord
Fiber Patch Cord

LC–LC Duplex OS2 Patch Cord

Duplex LC–LC patch cord in G.657A2 single-mode with 2.0 mm LSZH jacket, IL ≤ 0.15 dB and a serial-numbered test report per…

MF-PC-LL-DX-OS2 View spec
SC–SC Duplex OS2 Patch Cord
Fiber Patch Cord

SC–SC Duplex OS2 Patch Cord

SC–SC duplex single-mode patch cord with push-pull latched connectors, 2.0 mm LSZH cable and low-loss UPC polish.

MF-PC-SS-DX-OS2 View spec
Data center LC–LC Duplex OM4 Patch Cord
Fiber Patch Cord

LC–LC Duplex OM4 Patch Cord

Laser-optimized OM4 LC–LC duplex patch cord in aqua LSZH, IL ≤ 0.15 dB at 850 nm for 10G/40G/100G trunks.

MF-PC-LL-DX-OM4 View spec
LC/APC Simplex OS2 Patch Cord
Fiber Patch Cord

LC/APC Simplex OS2 Patch Cord

Simplex LC/APC patch cord with 8° angled polish and ≥ 60 dB return loss, the standard drop lead for GPON and XGS-PON…

MF-PC-LA-SX-OS2 View spec
FC/APC Duplex OS2 Patch Cord
Fiber Patch Cord

FC/APC Duplex OS2 Patch Cord

Threaded FC/APC duplex patch cord for CATV headends and test racks, with a metal housing and ≥ 60 dB return loss.

MF-PC-FA-DX-OS2 View spec
FC/UPC Duplex OS2 Patch Cord
Fiber Patch Cord

FC/UPC Duplex OS2 Patch Cord

FC/UPC duplex single-mode patch cord for telecom ODFs and legacy transmission equipment, flat PC polish at 50 dB return loss.

MF-PC-FU-DX-OS2 View spec
Next step

Send us your network drawing

We will reply with a proposed bill of materials, the calculated loss per link and a price for the complete set.

Chat on WhatsApp +86 159 1545 1535 · reply in ~1 h